贵州附近有没有服务

Welcome to shredder, metal shredder, double axis shredder, plastic shredder, wood shredder! fifteen billion six hundred and seventeen million one hundred and fourteen thousand seven hundred and forty-one


News Center

Current location: home page  >  News Center
News Center

How to effectively prevent the phenomenon of card machine in the production process of metal shredder

Click: 0 Time: September 16, 2019

How to prevent metal effectively Shredder The phenomenon of card machine in the production process
Metal shredder is mainly composed of shredder blade group, suitcase, box support, feeding system, power system and electrical control system. It is mainly used to tear light metal and thin metal with certain strength to increase its bulk density for transportation and recycling. Chopped objects, such as metal drums, refrigerators, cars, scrap steel, steel furniture, etc.
Double shaft or single shaft shredder is used. The cutter head, the cutter head, the cutter head, and the cutter head in the cutting chamber, the cutter head, and the cutter head are pulled gently, and the cutter head is pulled, and the cutter head is fixed. Gearbox can effectively avoid motor damage or blade damage caused by machine overload or excessive feed. A hammer or blade is used to destroy long metal scrap by rotating the spindle impeller at high speed. The high-speed rotating spindle (about 1000 rpm) has a plurality of circular steel plates connected in series, and the circular plates rotate together with the spindle. There are four to six pinions cast in manganese steel around the round plate. The pinion rotates freely on its own pinion. Due to the uneven size of scrap metal materials, large-scale metal crusher adopts claw machine for feeding, and the feeding amount is different, which will cause card machine phenomenon in the production process. So how to effectively prevent the card machine phenomenon in the production process: for example, the hardness of the production material is too high, which exceeds the crushing capacity of the metal shredder; if the material is too large, it will also produce a certain amount of feed to the metal crusher.
This requires operators to observe carefully, find problems in time and solve them in time, so as to ensure the normal operation of metal crusher equipment. Metal crushing equipment is equipped with wedge or washer adjustment. The top of the wedge is equipped with adjusting bolts. The clearance between the two wedges can be adjusted when the wedge roller is pushed away from the fixed roller. The larger the size of the discharged particles. When the wedge member is downward, the two rollers of the movable roll will be smaller under the action of the pressure spring, and the discharge particle size will be smaller.

Related products

Related information