贵州附近有没有服务

Welcome to shredder, metal shredder, double axis shredder, plastic shredder, wood shredder! fifteen billion six hundred and seventeen million one hundred and fourteen thousand seven hundred and forty-one


News Center

Current location: home page  >  News Center
News Center

The main purpose of scrap iron shredder is to cut all kinds of unqualified scrap iron into small pieces for recycling

Click: 0 Time: September 2, 2019

How to avoid it Scrap iron shredder Equipment failure
The main purpose of scrap iron shredder is to cut all kinds of unqualified scrap iron into small pieces for recycling. Reduce the amount of raw materials mixed with other materials.
How to avoid the equipment failure in the daily production of scrap iron Shredder? Foreign trade company will introduce to you:
First of all, during inspection and cleaning, the machine should be cleaned in time at the end of each day. Check for loose screws and worn parts such as claws, screens, etc.
Secondly, add grease in time, usually assemble the oil cup on the bearing. Usually, as long as the oil cup cover is rotated 1 / 4 times every 2 hours, the grease in the oil cup will be pressed into the bearing. In the case of closed bearings, grease can be added every 300 hours. If the grease deteriorates after long-term use, clean the bearing and replace it with a new one. When the machine is working, the bearing temperature should not exceed 40 ° C. If the bearing temperature continues to rise under normal operating conditions, the cause should be determined.
Third, do not arbitrarily increase the speed of scrap iron shredder. Generally, the difference between the speed and the rated speed is 8 to 10 percent. When the scrap iron crusher is working on a high-power machine, the flow rate should be controlled to make the flow uniform, so as to avoid sudden acceleration or deceleration. In the equipment structure, it is necessary to replace the old equipment and damaged equipment in time to greatly improve the utilization rate. At the same time, automatic synchronous management of production line is established, which can save time and facilitate production.
The design principle of the high frequency iron separator is to produce the current in the iron scrap separator. When the machine is running, a high frequency alternating magnetic field is generated on the surface of the sorting roller. When the metal enters the separation area of high magnetic field, eddy current is induced inside the metal block. The magnetic field produced by eddy current is opposite to the original magnetic field. There is a force of mutual exclusion. This repulsive force can throw the metal block forward and achieve the purpose of separation. The recovery value of scrap metal and aluminum can be completely separated quickly and accurately, and useful metals can be classified and classified so that the waste can be reused.

Related products

Related information