贵州附近有没有服务

Welcome to shredder, metal shredder, double axis shredder, plastic shredder, wood shredder! fifteen billion six hundred and seventeen million one hundred and fourteen thousand seven hundred and forty-one


News Center

Current location: home page  >  News Center
News Center

How to avoid scrap machine failure

Click: 0 Time: August 30, 2019

How to avoid it Scrap iron shredder Equipment failure
The main purpose of scrap iron shredder is to cut all kinds of unqualified scrap iron into small pieces for recycling. Reduce the amount of raw materials mixed with other materials.
How to avoid the equipment failure in the daily production of scrap iron Shredder? Foreign trade company will introduce to you:
First of all, timely inspection and cleaning, the machine should be cleaned at the end of each day. Check for loose screws and worn parts such as claws, screens, etc.
Secondly, grease should be added in time, and the cap oil cup is usually assembled on the bearing. Usually, as long as the oil cup cover is rotated 1 / 4 times every 2 hours, the grease in the oil cup will be pressed into the bearing. In the case of closed bearings, grease can be added every 300 hours. If the grease deteriorates after long-term use, clean the bearing and replace it with a new one. When the machine is working, the bearing temperature should not exceed 40 ° C. If the bearing temperature continues to rise under normal operating conditions, the cause should be determined.
Third, do not arbitrarily increase the speed of scrap iron shredder. Generally, the difference between the speed and the rated speed is 8 to 10 percent. When scrap iron shredder is working on high power machine, the flow rate should be controlled to make the flow uniform so that it will not accelerate or decelerate suddenly. In the equipment structure, it is necessary to replace the old equipment and damaged equipment in time to greatly improve the utilization rate. At the same time, the synchronous automatic management of production line is set up, which not only saves time, but also benefits production.
The metal separator of scrap iron shredder is designed based on the principle that the conductor generates induced current in high frequency alternating magnetic field. When the machine is working, a high frequency alternating magnetic field is generated on the surface of the sorting roller. When the metal enters the separation area of high magnetic field, eddy current is induced inside the metal block. The magnetic field produced by eddy current is opposite to the original magnetic field. There is a force of mutual exclusion. This repulsive force can throw the metal block forward and achieve the purpose of separation. The recycling value of waste metal and aluminum can be quickly and accurately separated, and the useful metals can be classified and classified, so that the garbage can be reused.

Related products

Related information